Crazy Wisdom podcast show image

Crazy Wisdom

Stewart Alsop III | AI, Consciousness & Technology

Podcast

Episodes

Listen, download, subscribe

Episode #583: Five Materials, One Print: How MIT Printed a Working Motor for 50 Cents

In this episode of the Crazy Wisdom Podcast, host Stewart Alsop sits down with Luis Fernando Velásquez-García, a principal research scientist at MIT's Microsystems Technology Laboratories, to explore the fascinating world of microsystems and three d printing at incredibly small scales. They discuss how miniaturization enables better performance in engineering applications, the evolution from semiconductor cleanroom technology to additive manufacturing, and the revolutionary potential of multi-material three d printing. Velásquez-García explains his work on monolithic manufacturing—building complex devices in one piece rather than assembling components—and how this approach could democratize technology by enabling local, on-demand production instead of relying on centralized manufacturing hubs. The conversation covers everything from vacuum nano electronics and micromotors to the practical challenges of building multi-material printers, touching on topics like the environmental costs of current manufacturing, the importance of material diversity in functional hardware, and how three d printing technology could fundamentally change how we make and distribute products. Key Insights1. Microsystems technology represents a field where miniaturization directly improves performance across multiple dimensions including speed, energy efficiency, and complexity. Unlike conventional wisdom that bigger is better, microsystems operate on the principle that smaller components work better in specific applications. This counterintuitive approach requires expertise across multiple disciplines including chemistry, manufacturing, and electrical engineering, making it a uniquely challenging field where depth of knowledge in many areas is essential for meaningful contribution. 2. The semiconductor cleanroom infrastructure has enabled the technological revolution we see today, from driverless cars to smartphones, but it has significant limitations. These facilities operate continuously and maintain extraordinarily clean conditions far exceeding hospital operating rooms, which is necessary because semiconductors are extremely sensitive to contamination. However, this technology is primarily designed for electronics and struggles with fluids and three-dimensional structures, which is why new approaches to microsystems manufacturing are necessary. 3. Additive manufacturing of microsystems represents a fundamental shift away from assembly-line production toward monolithic printing, where complex devices are built in a single process without assembly. The current manufacturing model creates enormous waste, as demonstrated by the fashion industry where significant amounts of unused clothing end up in landfills. By making products on demand using multiple materials with different properties, additive manufacturing eliminates the need for large inventories and reduces the environmental impact of transporting goods across vast distances. 4. Current manufacturing is dangerously centralized, with about 90 percent of high-end computer chips made in Taiwan, creating significant vulnerability in global supply chains. Three-dimensional printers can be deployed anywhere, potentially in remote locations, as long as printable materials are available. This democratization of manufacturing capability means that instead of having a handful of facilities producing everything, local production becomes possible, dramatically reducing energy consumption and pollution from transportation while making technology accessible to more people worldwide. 5. Multi-material three-dimensional printing is essential for creating functional hardware because different materials enable different functions, similar to how biological systems seamlessly integrate bones, arteries, nerves, and muscles. Current three-dimensional printers mostly work with single materials, but functional devices like motors require five or six different materials including electrical conductors, insulators, hard and soft magnetics, and rigid and flexible components. Multi-material printing requires dedicated nozzles for each material, avoiding cross-contamination that would otherwise waste material and compromise quality. 6. The fundamental technologies for three-dimensional printing fall into three main categories: vat photopolymerization using light to solidify liquids, powder-based systems using lasers for metal printing, and extrusion-based systems that are the most versatile for multi-material applications. Extrusion can work with real engineering materials like nylon without the compromises required by photopolymerization, though it currently produces larger voxels than cleanroom processes. Commercial printers typically use voxels between one micron and tens of microns, compared to cleanroom capabilities of tens of nanometers. 7. Vacuum electronics manufactured through three-dimensional printing enables capabilities impossible with semiconductors, including operating at speeds approaching the speed of light. These systems are already ubiquitous in technologies like radar systems and microwave ovens, though most people are unaware of their presence. Similarly, smartphones contain numerous microsystems including accelerometers for inertial navigation and gyroscopes for angular positioning, demonstrating how microsystems technology already pervades everyday life while remaining invisible to most users, representing a significant opportunity for expanded applications through democratized manufacturing. Timestamps00:00 Luis Fernando Velásquez-García introduces his work at MIT's Microsystems Technology Laboratories, explaining what microsystems are and how they differ from traditional engineering approaches. 03:47 Discussion of semiconductor cleanroom technology and its limitations, leading to the development of additive manufacturing for microsystems using multiple materials monolithically without assembly. 06:50 Exploration of monolithic manufacturing versus traditional assembly line production, addressing environmental waste in fashion and other industries, and how on-demand production could revolutionize manufacturing. 11:14 Deep dive into multi-material printing capabilities and the importance of integrating different materials like conductors, magnets, and flexible components to create functional hardware rather than just visualizations. 15:23 Explanation of centralized manufacturing problems, particularly semiconductor production concentrated in Taiwan, and how decentralized three-d printing could enable local production anywhere. 24:58 Discussion of manufacturing democratization through three-d printing technology and personalized, on-demand production possibilities. 28:16 Detailed explanation of voxel sizes, extrusion-based printing advantages for functional materials, and why multi-material capability matters more than single-material visualization for practical applications. 31:00 The few ways to 3D print: vat photopolymerization, powder-based laser systems, and extrusion techniques. 39:23 Practical discussion about commercial multi-material printers, tool changers, extruder systems, and cross-contamination challenges requiring dedicated nozzles for different materials. 41:36 Requirements for printing complex devices like motors needing five to six different materials including conductors, insulators, magnetic materials, and compliant mechanisms working together. 43:43 Bambu Lab printers and cloud connectivity concerns, parallels to Microsoft monopolistic practices, importance of open-source designs and local manufacturing sovereignty. 50:35 Science communication importance, knowledge sharing between research communities, and how three-d printing democratizes manufacturing similar to how coding became accessible to everyone. 58:41 Sensor technology in printers including pressure, temperature, and position sensors, and the recipe of parameters behind every print. 62:34 A student's printers that produce magnetized material, why vacuum electronics can outpace semiconductors, and Halbach arrays for controlling charged particles. 64:52 Real-world applications of vacuum electronics in radar systems and microwave ovens, and microsystems hidden in smartphones like accelerometers and gyroscopes. 67:50 Closing remarks: how to find the Velásquez Group at multiplexed.mit.edu and get in touch about the technology. LinksMultiplexed Lab at MIT

Crazy Wisdom RSS Feed


Share: Twitter • Facebook

Powered by Plink Plink icon plinkhq.com